The Outdoors IDEA
|
The Outdoors IDEA
Around the House, Around the Park, Around Adventure, and Around the Great Outdoors!
|
 Resurface your deck in one weekend! Follow these simple steps to a new deck surface that you can spend less time maintaining and more time enjoying!(BPT) - Outdoor living season means backyard BBQs, yard games and relaxing with a good book or good friends. If you own a wood deck, however, it also means considerable time and money spent on seasonal maintenance and deck repairs. While wood decks are aesthetically pleasing, properly maintaining them requires regular stripping, sanding and staining. The process is labor-intensive, time-consuming, messy and costly — averaging between $540 and $1,050 each time, according to HomeAdvisor.com. Consider this: For the same time and energy you would spend maintaining and repairing those old wood boards, you could replace them with a deck made of structurally superior composite material — and never again have to worry about upkeep. As long as the structural framework of your existing deck is intact and in good condition, you are a candidate for deck resurfacing. “Resurfacing an aging or decaying wood deck with new composite decking is a doable DIY project that can be completed over the course of a weekend or two with just a little know-how and the help of a few friends,” explains Adam Zambanini, vice president of marketing for Trex Company. “You get a brand-new deck for a lot less money than starting from scratch — and a lot less hassle through the years.” Designed for maximum durability and minimal maintenance, wood-alternative decking is resistant to fading, staining, scratching and mold and, unlike wood, requires no sanding, staining or sealing. Just an occasional soap-and-water cleaning is all that is needed to retain a “like-new” appearance and durability for decades. Ready to resurface? Follow these simple steps to a new deck surface that you can spend less time maintaining and more time enjoying: Step 1: Examine the substructure Before removing any boards, check your deck’s foundation. Start from the ground up by examining the footings, posts and joists. Pay close attention to the condition of the wood. Soft wood indicates rot and should be replaced before proceeding. If the existing framing and substructure are sound, you’re good to go. Tip: To help ensure your substructure lasts as long as your new composite deck boards, use a protective tape, such as TrexProtect, to shield wooden joists and beams from moisture that can lead to rot and the loosening of deck screws and fasteners. Step 2: Remove old deck boards Remove any existing railing and begin prying up the nailed decking boards, leaving the substructure and framing in place. Start from the outside and move toward the house so you have a solid, safe platform from which to work. Step 3: Level it out To ensure a level surface for the new deck boards, make sure the joists are flat and even with one another. If any joists are bowed, you may need to plane or cut them. Step 4: Install new deck boards Begin laying out the new composite boards. Starting near the house, face screw the first board to the frame. Closely follow the instructions for spacing from the manufacturer’s installation guide. As you progress, check the spacing between the house and the deck boards to make sure they stay parallel with the house. Correct variations a little at a time over several rows to avoid large, tapered gaps. Step 5: Complete with railing Measure for each post location, and cut placement holes with a jigsaw. Then, drop the posts into the holes and bolt them securely. Slide sleeves over the posts and assemble railing and balusters per the installation guide. Finish off by adding your choice of decorative elements, such as post caps and top rail caps. For more guidance on deck resurfacing, watch a step-by-step video from Trex at https://youtu.be/ZI8CYwI0MYM. KEYWORDS
Spruce Up Your Outdoor Spaces
Over time, the appearance and function of any outdoor space can dull due to combinations of heat, precipitation and use. With some careful attention, you can quickly spruce up your outdoor living areas and get them back in great working order for patio season.Spruce Up Your Outdoor Spaces
(Family Features) Over time, the appearance and function of any outdoor space can dull due to combinations of heat, precipitation and use. With some careful attention, you can quickly spruce up your outdoor living areas and get them back in great working order for patio season. 
Take Care of Textiles Declare Dust Off-Limits Freshen Up Finishes Blast Away Grime When cleaning these surfaces, it’s important to find a power washer that can cut through the grime and rinse it away. In addition to gas-powered options, Briggs & Stratton offers a full line of electric pressure washers to help you tackle light-duty outdoor cleaning projects around the house. Some models, like the S1800, feature a turbo nozzle to give you the ability to blast away grime up to 40 percent faster than with a standard spray tip. When that power is combined with an onboard detergent tank, you can eliminate outdoor grime quickly and efficiently, so you can get back to enjoying your outdoor living space. Getting started is simple. Just turn on the washer and begin with a rinse setting to loosen dirt and debris. Next, use the soap nozzle to apply the detergent in the tank. You may want to let the detergent sit for especially grimy areas, depending on the detergent’s directions for use. Rinse thoroughly and repeat the process if needed. 
7 Safety Tips for Operating a Pressure WasherAs with any power equipment, it’s important to know how to operate a pressure washer safely and correctly. Even if you’ve had your unit for a while, it’s a good idea to refresh yourself on how to use it properly before you get started on your outdoor to-do list. 1. Dress for the task. Wear indirect-vented (chemical splash) goggles for eye protection and a pair of closed-toe shoes such as sneakers or boots. 2. Before getting started, be sure to remove all electronics, cords and wires, and place them safely away from water. 3. Perform routine maintenance. Prior to each use, check the oil level and top off if low. Check the water screens to ensure they can freely move water. Inspect hoses and couplings; if they are cracked or brittle, replace them. 4. Know your equipment and where it can or can’t be used. Never operate your gas pressure washer indoors or in enclosed structures. When operating a gas pressure washer, use it outdoors away from occupied spaces to prevent a potentially deadly buildup of carbon monoxide. 5. When operating a gas pressure washer, know the signs of potential carbon monoxide poisoning (dizziness, fatigue, headache, nausea or irregular breathing), and if you experience these symptoms get to fresh air right away and seek medical attention. 6. Always point the nozzle in a safe direction. Never operate a pressure washer near small children or pets. 7. Before storing, relieve the pressure in the system. Also run a cycle of water through the machine to eliminate any detergent residue and give the unit time to cool down before storing. The Powers of a Pressure Washer A pressure washer can provide up to 75 times more cleaning power than a standard hose for deep cleaning. They are ideal tools to clean the following areas:
Find more cleaning solutions and a limited-availability discount code for a S1800 electric power washer at Briggsandstratton.com/OutdoorCleaning. Photo courtesy of Getty Images (empty patio furniture) SOURCE:Briggs & Stratton KEYWORDS
Make your deck outstanding...and durable!
While planning a new outdoor living space can be overwhelming, chances are there’s a home improvement retailer nearby that offers an abundance of resources to help you tackle virtually any project. If a DIY deck project is on your to-do list, these tips can help you navigate the aisles like a pro.Tips for Tackling a DIY Deck Project
(Family Features) While planning a new outdoor living space can be overwhelming, chances are there’s a home improvement retailer nearby that offers an abundance of resources to help you tackle virtually any project. If a DIY deck project is on your to-do list, these tips can help you navigate the aisles like a pro. Do your homework. Get started by perusing retailer websites to learn about their product offerings and services. Then visit manufacturer websites for more information and to compare aesthetics and performance. Research your options and decide what materials and styles make the most sense for your lifestyle and preferences. For instance, if you are looking to spend more time enjoying your deck than maintaining it, you may consider a high-performance composite material, like Trex. Unlike wood, composite decking won’t rot, warp, crack or splinter, and resists fading, scratching and mold. Take advantage of retailer resources. After you’ve decided on a preferred material, your local big-box retailer can help you obtain additional information, design ideas and product samples. To help get you on your way, lowes.trex.com can help you explore the decking and railing collections available through Lowe’s. In addition to perusing an array of decking options, you also can preview designer-curated railing pairings. Once you find a combination that suits your outdoor space, you can download the materials list to better guide your in-store experience. Explore the store. Once you have determined the direction of your project and narrowed down your product preferences, orient yourself with the store landscape so you can navigate the merchandise in an order that correlates with your project. It may be easiest to start with decking materials in the lumber aisle and then move to railings, which can typically be found in an adjacent aisle or on an end-cap display. Pay close attention to signage and look carefully for logos to make sure you’re finding the brand you want. Ask an associate. Don’t be afraid to ask for help. The staff at your local retailer can provide tips to help you successfully navigate your project and the store. For instance, if the materials you are looking for aren’t on the shelves, many options are available via special order. Typically, an associate can arrange for the product you want to arrive in-store in about 10 days. Most stores also offer assistance with installation. When planning and building, the one-stop convenience of a big-box retailer makes it possible to construct a customized deck with confidence and without stress. Visit lowes.trex.com for more tips, tools and information on decking materials. SOURCE:Trex KEYWORDS
 (BPT) - It’s amazing to contemplate that all the famous paintings in history — from da Vinci’s Mona Lisa to van Gogh’s Starry Night — are essentially formed from three primary colors. Artists skillfully combine red, yellow and blue to formulate an infinite range of colors to bring their paintings to life. Likewise, when creating your own outdoor living space, you can combine three basic elements — decking, railing and lighting — in nearly endless ways to "paint" a personal masterpiece of fun and relaxation. 1. Get decked out with modern decking For decades, backyard decks mainly have been rectangles. This is largely because of the rectangular shape of traditional wood deck boards. With the advent of modern materials, it is now easier to fashion decks of virtually any shape — from curved sections following the contours of a sloping yard to round decks. Or, let your imagination run wild and create a specialty shaped deck of something you love, like a giant guitar or stacked leaves. “Today’s decking options offer exceptional design flexibility,” says Brent Gwatney, senior vice president of MoistureShield Decking. “Composites in particular are more easily bent into creative shapes than wood decking, and can be ripped and routed to form virtually any design you can think of.” DIYers and deck builders can even install moisture-resistant boards such as MoistureShield Vantage or Infuse decking on the ground, in the ground or under water for more design possibilities, notes Gwatney. 2. Rail against the ordinary Many decks are required by law to have safety railings. But, with some creativity, the railing can enhance your deck’s look even as it prevents falls. With the variety of products now available, the railing can be a visual complement to your home and deck. For example, if you have a cabin, you could install hewn timber posts and railings for a rustic appeal. For a waterfront home, a nautical-themed railing system of posts and ropes could do the trick. Or, if you have a modern home and prefer simple visual lines, cable-and-wire railings or glass panels could be your style. For a distinctive look for your deck, consider mixing colors and materials, like combining white aluminum railing and balusters with rich brown composite posts to create a dramatic look. Or, to add a sophisticated mix of texture and color, you can install on the top of a black or white railing a composite board that complements the decking color. 3. Light up the night A third element to add to your outdoor living design palette is deck lighting. With the right lighting, you can extend your hours outside and keep your deck as charming in the nighttime as it is during the day. From subtle post lights that cast a magical evening glow to understated recessed lights and rail strip lights that help guide guests’ steps, today’s deck lighting choices are both functional and affordable. And, with the emergence of energy-efficient LEDs, you can use them liberally with little effect on your monthly electricity bill. Some decking manufacturers like MoistureShield offer deck lights specifically designed to integrate with their decking and railing. KEYWORDS:
The season of backyard barbecues and outdoor entertaining is here, but for thousands of homeowners with worn out wooden decks, the return of warmer weather means one thing: deck repair and maintenance. The time and energy required to strip, sand and stain a wood deck could instead be used to replace those old boards with new ones. Where designing and building a new deck from scratch can take months, resurfacing an existing deck is a doable DIY project that can be completed over the course of a weekend by following these eight steps.
8 Steps to a Better Deck
(Family Features) The season of backyard barbecues and outdoor entertaining is here, but for thousands of homeowners with worn out wooden decks, the return of warmer weather means one thing: deck repair and maintenance. The time and energy required to strip, sand and stain a wood deck could instead be used to replace those old boards with new ones made of high-performance, low-maintenance composite material. Wood-alternative decking, like Trex, is resistant to fading, staining, scratching and mold and, unlike wood, requires no sanding, staining or painting. Just an occasional soap-and-water cleaning is all that is needed to retain a “like-new” appearance and durability for decades. Where designing and building a new deck from scratch can take months, resurfacing an existing deck is a doable DIY project that can be completed over the course of a weekend. If your deck is more trouble than its worth, recruit a few friends and follow these eight steps to a new deck that you can spend less time maintaining and more time enjoying. For more details, watch this step-by-step video covering the deck resurfacing process. When you’re ready to begin, take advantage of Trex’s online sample program to see firsthand how different colors and textures work with your home’s architecture and decor, and learn more about the full range of high-performance, low-maintenance outdoor living products at trex.com.
Before removing any boards, check your deck’s joists and the overall condition of the framing to ensure the substructure is sound before proceeding. If the foundation and deck framing system are sound, you can move on to the next step.
After obtaining any necessary building permits, carefully remove and discard the old decking and railing, leaving the substructure and framing in place.
Inspect all framing and framing hardware for code compliance, structural integrity and compliance with your chosen decking material. Consult the decking manufacturer’s installation guide for specifics.
To ensure a level surface for the new deck boards, make sure that the joists are level and even with each other. You may need to shave the joists to achieve this.
Begin laying new deck boards. Closely follow the instructions for spacing from the manufacturer’s installation guide. Consult the installation guide regularly, and if you have any questions along the way, contact the professionals before proceeding.
Attach pressure-treated structural rail posts to framing as required by code and the installation guide.
Slide sleeves over the railing posts and assemble railing and balusters per the installation guide. Finish off by adding your choice of decorative elements, such as post caps or top rail caps.
Your deck makeover is complete, but your enjoyment is just beginning. With a 25-year Limited Fade and Stain Warranty, a Trex deck will look great for years to come. SOURCE:Trex
|
Archives
July 2018
Interested in Publishing on The Outdoor Idea?
Send your query to the Publisher today!
Categories
All
|
RSS Feed
