(BPT) - Outdoor living season means backyard BBQs, yard games and relaxing with a good book or good friends. If you own a wood deck, however, it also means considerable time and money spent on seasonal maintenance and deck repairs.

While wood decks are aesthetically pleasing, properly maintaining them requires regular stripping, sanding and staining. The process is labor-intensive, time-consuming, messy and costly — averaging between $540 and $1,050 each time, according to HomeAdvisor.com.

Consider this: For the same time and energy you would spend maintaining and repairing those old wood boards, you could replace them with a deck made of structurally superior composite material — and never again have to worry about upkeep. As long as the structural framework of your existing deck is intact and in good condition, you are a candidate for deck resurfacing.

“Resurfacing an aging or decaying wood deck with new composite decking is a doable DIY project that can be completed over the course of a weekend or two with just a little know-how and the help of a few friends,” explains Adam Zambanini, vice president of marketing for Trex Company. “You get a brand-new deck for a lot less money than starting from scratch — and a lot less hassle through the years.”

Designed for maximum durability and minimal maintenance, wood-alternative decking is resistant to fading, staining, scratching and mold and, unlike wood, requires no sanding, staining or sealing. Just an occasional soap-and-water cleaning is all that is needed to retain a “like-new” appearance and durability for decades.

Ready to resurface?

Follow these simple steps to a new deck surface that you can spend less time maintaining and more time enjoying:

Step 1: Examine the substructure

Before removing any boards, check your deck’s foundation. Start from the ground up by examining the footings, posts and joists. Pay close attention to the condition of the wood. Soft wood indicates rot and should be replaced before proceeding. If the existing framing and substructure are sound, you’re good to go.

Tip: To help ensure your substructure lasts as long as your new composite deck boards, use a protective tape, such as TrexProtect, to shield wooden joists and beams from moisture that can lead to rot and the loosening of deck screws and fasteners.

Step 2: Remove old deck boards

Remove any existing railing and begin prying up the nailed decking boards, leaving the substructure and framing in place. Start from the outside and move toward the house so you have a solid, safe platform from which to work.

Step 3: Level it out

To ensure a level surface for the new deck boards, make sure the joists are flat and even with one another. If any joists are bowed, you may need to plane or cut them.

Step 4: Install new deck boards

Begin laying out the new composite boards. Starting near the house, face screw the first board to the frame. Closely follow the instructions for spacing from the manufacturer’s installation guide. As you progress, check the spacing between the house and the deck boards to make sure they stay parallel with the house. Correct variations a little at a time over several rows to avoid large, tapered gaps.

Step 5: Complete with railing

Measure for each post location, and cut placement holes with a jigsaw. Then, drop the posts into the holes and bolt them securely. Slide sleeves over the posts and assemble railing and balusters per the installation guide. Finish off by adding your choice of decorative elements, such as post caps and top rail caps.

For more guidance on deck resurfacing, watch a step-by-step video from Trex at https://youtu.be/ZI8CYwI0MYM.

• Family Features×
• outdoor×
• backyard×
• deck×
• decking×
• Decks×
• home improvement×
• project×
• DIY×
• do it yourself×
• tips×
• advice×
• house×
• materials

(BPT) - It’s amazing to contemplate that all the famous paintings in history — from da Vinci’s Mona Lisa to van Gogh’s Starry Night — are essentially formed from three primary colors. Artists skillfully combine red, yellow and blue to formulate an infinite range of colors to bring their paintings to life.

Likewise, when creating your own outdoor living space, you can combine three basic elements — decking, railing and lighting — in nearly endless ways to "paint" a personal masterpiece of fun and relaxation.

1. Get decked out with modern decking

For decades, backyard decks mainly have been rectangles. This is largely because of the rectangular shape of traditional wood deck boards. With the advent of modern materials, it is now easier to fashion decks of virtually any shape — from curved sections following the contours of a sloping yard to round decks. Or, let your imagination run wild and create a specialty shaped deck of something you love, like a giant guitar or stacked leaves.

“Today’s decking options offer exceptional design flexibility,” says Brent Gwatney, senior vice president of MoistureShield Decking. “Composites in particular are more easily bent into creative shapes than wood decking, and can be ripped and routed to form virtually any design you can think of.” DIYers and deck builders can even install moisture-resistant boards such as MoistureShield Vantage or Infuse decking on the ground, in the ground or under water for more design possibilities, notes Gwatney.

2. Rail against the ordinary

Many decks are required by law to have safety railings. But, with some creativity, the railing can enhance your deck’s look even as it prevents falls. With the variety of products now available, the railing can be a visual complement to your home and deck. For example, if you have a cabin, you could install hewn timber posts and railings for a rustic appeal. For a waterfront home, a nautical-themed railing system of posts and ropes could do the trick. Or, if you have a modern home and prefer simple visual lines, cable-and-wire railings or glass panels could be your style.

For a distinctive look for your deck, consider mixing colors and materials, like combining white aluminum railing and balusters with rich brown composite posts to create a dramatic look. Or, to add a sophisticated mix of texture and color, you can install on the top of a black or white railing a composite board that complements the decking color.

3. Light up the night

A third element to add to your outdoor living design palette is deck lighting. With the right lighting, you can extend your hours outside and keep your deck as charming in the nighttime as it is during the day.

From subtle post lights that cast a magical evening glow to understated recessed lights and rail strip lights that help guide guests’ steps, today’s deck lighting choices are both functional and affordable. And, with the emergence of energy-efficient LEDs, you can use them liberally with little effect on your monthly electricity bill. Some decking manufacturers like MoistureShield offer deck lights specifically designed to integrate with their decking and railing.