Follow these simple steps to a new deck surface that you can spend less time maintaining and more time enjoying!
(BPT) - Outdoor living season means backyard BBQs, yard games and relaxing with a good book or good friends. If you own a wood deck, however, it also means considerable time and money spent on seasonal maintenance and deck repairs.
While wood decks are aesthetically pleasing, properly maintaining them requires regular stripping, sanding and staining. The process is labor-intensive, time-consuming, messy and costly — averaging between $540 and $1,050 each time, according to HomeAdvisor.com.
Consider this: For the same time and energy you would spend maintaining and repairing those old wood boards, you could replace them with a deck made of structurally superior composite material — and never again have to worry about upkeep. As long as the structural framework of your existing deck is intact and in good condition, you are a candidate for deck resurfacing.
“Resurfacing an aging or decaying wood deck with new composite decking is a doable DIY project that can be completed over the course of a weekend or two with just a little know-how and the help of a few friends,” explains Adam Zambanini, vice president of marketing for Trex Company. “You get a brand-new deck for a lot less money than starting from scratch — and a lot less hassle through the years.”
Designed for maximum durability and minimal maintenance, wood-alternative decking is resistant to fading, staining, scratching and mold and, unlike wood, requires no sanding, staining or sealing. Just an occasional soap-and-water cleaning is all that is needed to retain a “like-new” appearance and durability for decades.
Ready to resurface?
Follow these simple steps to a new deck surface that you can spend less time maintaining and more time enjoying:
Step 1: Examine the substructure
Before removing any boards, check your deck’s foundation. Start from the ground up by examining the footings, posts and joists. Pay close attention to the condition of the wood. Soft wood indicates rot and should be replaced before proceeding. If the existing framing and substructure are sound, you’re good to go.
Tip: To help ensure your substructure lasts as long as your new composite deck boards, use a protective tape, such as TrexProtect, to shield wooden joists and beams from moisture that can lead to rot and the loosening of deck screws and fasteners.
Step 2: Remove old deck boards
Remove any existing railing and begin prying up the nailed decking boards, leaving the substructure and framing in place. Start from the outside and move toward the house so you have a solid, safe platform from which to work.
Step 3: Level it out
To ensure a level surface for the new deck boards, make sure the joists are flat and even with one another. If any joists are bowed, you may need to plane or cut them.
Step 4: Install new deck boards
Begin laying out the new composite boards. Starting near the house, face screw the first board to the frame. Closely follow the instructions for spacing from the manufacturer’s installation guide. As you progress, check the spacing between the house and the deck boards to make sure they stay parallel with the house. Correct variations a little at a time over several rows to avoid large, tapered gaps.
Step 5: Complete with railing
Measure for each post location, and cut placement holes with a jigsaw. Then, drop the posts into the holes and bolt them securely. Slide sleeves over the posts and assemble railing and balusters per the installation guide. Finish off by adding your choice of decorative elements, such as post caps and top rail caps.
For more guidance on deck resurfacing, watch a step-by-step video from Trex at https://youtu.be/ZI8CYwI0MYM.
As many families prepare to ramp up their time spent outside, it can be helpful to keep the latest trends in mind while planning for outdoor living spaces. Since many people enjoy spending time in an outdoor living space, it’s fitting that the 2018 furnishing trends address the outdoor lifestyle experience.
Living Lavishly Outdoors with 2018 Trends
(Family Features) As many families prepare to ramp up their time spent outside, it can be helpful to keep the latest trends in mind while planning for outdoor living spaces.
According to research from the International Casual Furnishings Association, many people use outdoor rooms for things they can do indoors – from using cellphones for calls and games to working on computers, watching TV, eating, exercising and, of course, relaxing.
Since 70 percent of survey respondents said they enjoy spending time in an outdoor living space more than inside, it’s fitting that the 2018 furnishing trends address the outdoor lifestyle experience.
“Whether enclosed or open-air, outdoor spaces have come into their own as legitimate rooms in American homes,” said Jackie Hirschhaut, vice president of the American Home Furnishings Alliance and executive director of its outdoor division, the International Casual Furnishings Association. “Today’s outdoor rooms have it all – somewhere to dine, to relax and be entertained – with furnishings that function like they would for any room in the home and with style and flair that distinctly fits outdoors.”
Dining tables and chairs top many people’s outdoor shopping lists this year, followed by lounge chairs, lighting, fire pits, umbrellas and sofas. Leading the list of trends in the dynamic dining category is ultra-comfortable seating and a wide variety of table options.
Extra-large dining tables are popular for entertaining groups and al fresco dining. Yet manufacturers understand not everyone has a large outdoor space, so they also offer selections for small spaces, including dining sets suitable for apartment- and condo-size balconies, as well as sizes in-between.
The research also shows 68 percent of people use outdoor spaces several times a week in seasonally appropriate weather. Comfort, spaciousness and style were the most important factors in encouraging people to spend more time outdoors, which is why deep-seated chairs with high backs for relaxed comfort rank high on wish lists.
Often accompanying these group seating options are fire tables or pits, which continue to increase in popularity, according to the survey.
“We are seeing that fire of some sort for outdoors is topping many consumers’ wish lists again this year,” Hirschhaut said. “You just can’t beat a fire element for creating ambience.”
Much like spaces indoors, outdoor rooms are leaning more toward mixing rather than matching, both in individual pieces and in groups of pieces. To help meet this trend, try looking for pieces that incorporate several different elements such as aluminum, wicker and teak, as well as groups that pair, for example, wicker seating with iron or wood tables.
On the color spectrum, the survey found that after years of brown as a dominant color, shades of gray are increasingly peeking through as a more popular finish.
For more tips and information about creating a stylish outdoor living space, visit icfanet.org.
Photo courtesy of O.W. LeeSOURCE:
International Casual Furnishings Association
Interested in Publishing on The Outdoor Idea?
Send your query to the Publisher today!